PS 3200
Synth
Courtesy/Thanks to: Korg
Description: Korg PS-3200 w/PS3010 keyboard
Polyphony:48!
MIDI:no
Program storage:16 memories!
Dimensions:920w x 445h x 345d mm.
Weight:30 Kg
PS-3010 SPECS:Trigger outs(x3,single and multi),Slide switch out(x3),
Momentary switch and X-Y manipulator.48 notes.
PS-3200 SPECS:
SIGNAL GENERATOR 1:
-Temperament adjust x12(C to B individual tuning)-Waveform(Tri,saw,PWM,PW)
-Scale(16,8,4,2)-Scale modulation input-PWM input
SIGNAL GENERATOR 2:
-Temp.adjust x12-Waveform(tri,saw,PWM,PW,off)-Scale(16,8,4,2)
-Fine tuning(+-100 cents)-External FM intensity-FM input
-Scale modulation input-PWM input
SG1+2 TOTAL CONTROL:
-Total tuning(+-100 cents)-PWM speed-PWM intensity-Internal FM intensity
-External FM switch-External FM reverse switch-External FM intensity
-FM input
DINAMIC LOW-PASS FILTERS:
-Cutoff frequency-Peak-Keyboard filter balance-Expand
-Internal FcM intensity-External FcM switch-External FcM intensity
-FcM input
ENVELOPE MODIFIERS:
-ADSR-A.T. Control input-Release switch input
EQUALIZER:
-(125,250,500,1k,2k,4k,8k/Hz)
TOTAL SIGNAL MODIFIERS:
-Keyboard volume balance-AM intensity(0-200 %)-Ensemble depth
-Preset volume-VCA 1 Control input-VCA 2 Control switch
SAMPLE & HOLD:
-Clock frequency-Synchro switch-Clock indicator-S/H input-S/H output
-Trigger input-Clock Output
MODULATION GENERATOR 1:
-Waveform(tri,saw,rec,inv saw,pink noise,white noise.)-Frequency
-Frequency indicator-Frequency control input-MG1 output
MODULATION GENERATOR 2 (TRI):
-Frequency-Frequency indicator-MG2 output
MODULATION VCA:
-Modulation balance(S/H-MG1)-VCA control input
GENERAL ENVELOPE GENERATOR:
-Delay, Attack and Release time.-Auto switch-Trigger inputs(x2)
-Envelope outputs(x3)
VOLTAGE PROCESSERS(x2):
-Limiter A-Limiter B-VP2 input selector-Voltage inputs(x2)
-Controller inputs(x2)-VP output
ADDING AMPLIFIERS:
-Level 1,2.-Input 1,2.-A.A output-A.A rev output
VOLUME:
-Direct,headphone and final
SIGNAL OUTPUT:
-Direct,headphone and final
Written by Josue Arias (josue@skios.es)
for Music Machines.
Comments
You need to be logged in to add a comment.