MS20

Synth

Other names for this product: MS-20,

Courtesy/Thanks to:

Description: Specifications

Control Section

1. Keyboard C ~ C, 37 Keys / (3 octaves)
2. Voltage controlled oscillator 1
(VCO 1) Scale [32', 16', 8', 4'] / (6 octaves + 6 octaves (FM))
Wave form (TRI, SAW , Pulse, white noise) / (4 modes)
PW adjust
3. Voltage controlled oscillator 2
(VCO 2) Scale [16', 8', 4', 2'] / (6 octaves + 6 octaves (FM))
Wave form (SAW, SQU, Pulse, Ring Modulator / (4 modes)
Pitch/ (+- 1octave)
4. VCO master control Master tune/ (+-1/2octaves)
Portamento
Frequency Modulation intensity by MG/T.EXT
Frequency Modulation intensity by EG1/EXT
5. VCO mixer VCO-1 level
VCO-2 level
6. Voltage Controlled High Pass Filter Cutoff frequency
Peak [flat ~ self-OSC]
Cutoff Frequency Modulation intensity by MG/T.EXT
Cutoff Frequency Modulation intensity by EG2/EXT
7. Voltage Controlled Low Pass Filter Cutoff frequency
Peak [flat ~ self-OSC]
Cutoff Frequency Modulation intensity by MG/T.EXT
Cutoff Frequency Modulation intensity by EG2/EXT
8. Envelope generator 1 Delay time
Attack time
Release time
9. Envelope generator 2 Hold time
Attack time
Decay time
Sustain level
Release time
10. Modulation generator Wave form SQW-TRI-RAMP, Pulse-SQU-Pulse
Frequency
11. Manual controller Control wheel
Momentary switch
12. P. switch & volume Volume
13. Indicator LED (trigger, MG rate)


size=3>External Signal Processor
1. Control section Input signal level
Low cut frequency
High cut frequency
CV adjust
Threshold level
2. Input & output Signal in (auto-pad system)
Amplifier out / 0V ~ +8V
Band pass filtered out
CV out (F/V) / 0 ~ +8V
ENV out / 0 ~ +5Vv
Trig out / GND align=bottom border=0 419?>
3. Indicator (LED) Peak indicator
Trigger indicator


size=3>Patch Panel Section^
1. Keyboard Keyboard control voltage output (exponential) / 0 ~ +8V
Keyboard trigger output / GND
2. VCO VCO 1 + VCO 2 control voltage input (linear response) / 0V ~ +8V
VCO 2 control voltage input